The procedures outlined in this article were performed on a 1999 Jetta TDI MK IV. Examine your engine, look at these photos and study the locations of the components you may need to move during this maintenance task. Read completely through this guide at least once prior to starting so you are not surprised, or…
How to build your own type 2 dropped spindles. Here you can see the difference. The idea is to flip the link pin carriers upside down and turn 180 degrees. The fist step is to remove the link pins, link pin bushing, grease zerks, and pinch bolt. Then clean all of the grease/dirt build-up off…
Building these beams is very labor intensive, hence a guide was made to allow others to make them. The first thing to do is scrape and remove as much dirt/greese as you can. Then carefully cut the welde so that you can remove the complete center pin carrier from the beam. On a bay window…
When lowering springs are not an option, coilover suspension seems the only logical choice. To avoid spending extra money on coilover suspension, there is another way to lower a car which costs about $ 50. The basic idea is to shorten the strut housing and rod 2″-3″ so that it doesn’t bottom out when the…